CategoryOther

Safety Tips When Installing Solar Systems On The Gold Coast

Installing solar systems on the Gold Coast on the roof is a better good way of reducing your own impact on the environment, while saving money. The initial investment can be costly, but there are many solar system kits on the market that allows install the panels yourself. And, if the job is completed properly, you can bank on selling electricity back into the grid instead of paying for it. Below are some useful tips on how to install the solar systems yourself.

First, you need to measure the area of the roof to determine the number and size of solar system plates which can be put in place. If you live in the Gold Coast, your roof space should face south. And vice versa if you live in the southern hemisphere. An alternative, to installing on the roof, is installing on a ground rack in a shade free area of the property.

Next, buy the solar system plates ensuring that you have the same number you intend to install. In addition, you should pick up a rooftop connector kit that is designed especially for domestic use.

Follow the instructions provided

Ensure that you cover any holes where bolts or screws enter through the roof to the truss. You should use a water-resistant silicone or any other sealant to prevent water seeping through and rotting the roof. Also, you should attach the solar system into the mounting rails, then secure into place.

Next, connect the wiring of your solar system to the existing home electricity system. For safety purposes, and to ensure a proper connection, always engage an electrician for this final step.

When the connection is complete, you should contact your electric company and inform them that your solar system has been installed and is now working. When you call, take the opportunity to advise them that you would like to sell electricity back them and find out how that works. Supplying energy back into the grid is a better way of getting electricity instead of purchasing. Installing solar systems makes a lot of sense for some facts, and if you install solar system yourself, from an economic point of view it is very attractive.

Using SMA Inverters Most Efficiently

The need for renewable energy had seen a northward trend since the first time since the beginning when man realized that fossil fuels are depleting at an alarming rate. Renewable energy can be classified as energy which comes from any of the natural resources namely; sunlight, rain, wind, tides and geothermal heat. Such energy can be replenished naturally and has no dependence on any human activities. As per stats available, the use of wind power is increasing at an annual rate of 20%. These stats might not be enough to show the rise in the use of renewable energy around the globe, but then they do show that the human race is seriously looking at alternative sources of energy.

Solar power or solar energy is one the widely used source of renewable energy that is being used at various places around the world. The sun’s radiation is used to generate energy and the same can be done either in an active manner (using photovoltaic) or in a passive form (using concentrated solar power). These concentrated solar power projects have been operational since the early 1980s with the largest solar power project being installed in the Mojave Desert, California.

So, in a nut shell. This is how to use SMA inverters the most efficient way. Solar power is the conversion of solar radiation into electricity. Now, how can one do that. The answer to this would be by using inverters or better SMA inverters that are used with the photovoltaic solar cells for converting the solar power to electricity.

These SMA inverters converts the direct current (DC) to alternating current (AC). This alternating current can be kept at the required voltage and frequency by the use of transformers, control panels and switches.

A solar inverter or an SMA inverter can be attached to a commercially used electrical grid or with any off-grid electrical network. These inverters are specifically designed and are adaptable for use with photovoltaic arrays and include maximum power point tracking with anti-islanding protection. These inverters are useful as this electricity that is generated can be used for heating of ordinary household and also commercial appliances.

These inverters can be classified into 3 types, namely; Stand-alone inverters, which can be used with an isolated system by drawing energy from the batteries charged by the photovoltaic system; Grid-tie inverters, which are created to stop working automatically when the utility supply stops and cannot provide with any power back up in case of a utility outage; Battery Back-up inverters, are the special category inverters used to draw power from a battery while managing the charging of the battery and also transferring excess power to the utility grid.

© 2017 Khan Project

Theme by Anders NorenUp ↑